AT&T 585-300-903 manual Manager II Mode 3 Administration Proc 100, Word

DCP Mode 3 Installation and Administration 12-3

_______________________________________________________________________________________

_

Using Procedure 100, Word 2, assign BCCOS 3 to the DS1 trunk group to provide 64K clear-channel signaling (trunk group 77 is only an example).

If BCCOS 3 has been modified at your site, use a custom BCCOS that has the default values of BCCOS 3. Refer to the DEFINITY Generic 2 Administration Procedures manual (555-104-506) for default BCCOS values if needed.

ENHANCED MODE - PROCEDURE: 100, WORD: 2

TRUNK GROUPS - MODEM POOLING AND BCCOS

1.	Trunk Group:	77
2.	Bearer Capability Class of Service:	3

MODEM POOLING

3.Originate Mode: _

4.Answer Mode: _

5.Modem Type: _

6.First Choice: _

7.Test Type: _

Connected to CC0 ON-LINE ♥

MAJOR

MINOR

RUN TAPE

BUSY OUT

IN USE

WAIT

enter command: _

2 Repeat 3 Form

5 Help 6 Field 7 Input 8 Cmds

Figure 12-1.Manager II Mode 3 Administration (Proc 100, Word 2)

3.For remote networking configurations using AAR or ARS: If the local AUDIX DCP extension is dialing AAR or ARS to reach a remote AUDIX system, the appropriate pattern and preference must indicate BCCOS 3 (Proc 309, Word 5, Field 6 = 3, or Proc 321, Word 5, Field 5 = 3).