AT&T 585-300-903 manual 11-26DCP Mode 2 Installation and Administration

11-26DCP Mode 2 Installation and Administration

________________________________________________________________________________________________

________________________________________________________________________________________________

3.Using Procedure 014, assign a custom BCCOS that is translated with all the speeds optioned for the data modules in the modem pool. The custom BCCOS should mirror the default BCCOS 1 except for the data rates chosen (BCCOS 1 automatically defaults to all speeds.)

In Figure 11-11,Manager II Administration for Digital Side of Modem Pooling (Proc 014, Word 1), a custom BCCOS of 10 is shown as an example only.

ENHANCED MODE - PROCEDURE: 014, WORD: 1

BEARER CAPABILITY CLASS OF SERVICE - CALL OPTIONS

1.	Bearer Capability COS:	10		DEFAULT CAPABILITIES
2.	Transport Mode:	0	Circuit	14.	Transport	Mode: 0	Circuit
3.	Information Type:	0	Restrict	15.	Information	Type: 0	Restricted
				16.	Bearer Capability: 2		Mode 2

CALL TYPES AND ACTION TAKEN

4.Voice: 0 Circuit switch the call

5.Voice Grade Data: 1 Insert a mode 2-to-analog modem pool facility

6.Mode 0: 0 Circuit switch the call

7.Mode 1: 0 Circuit switch the call

8.Mode 2: 0 Circuit switch the call

9.Mode 3: 0 Circuit switch the call

10.Unknown Digital: 0 Circuit switch the call

11.Unknown Analog: 1 Insert a mode 2-to-analog modem pool facility

12.Mode 3/2: 0 Circuit switch the call

13.X.25: 0 Circuit switch the call

Connected to CC0 ON-LINE ♥

MAJOR

MINOR

RUN TAPE

BUSY OUT

IN USE

WAIT

enter command: _

3 Data

5 Help 6 Field 7 Input 8 Cmds

Figure 11-11.Manager II Administration for Digital Side of Modem Pooling (Proc 014, Word 1)