AT&T 585-300-903 manual Manager II Administration of DCP Port Proc 000, Word

DCP Cabling and Administration 9-11

_______________________________________________________________________________________

_

2.Assign all four extensions (or six if you are converting RS-232 ports to DCP) to Bearer Capability Class-Of-Service (BCCOS) 6 as shown in Figure 9-5, Manager II Administration of a DCP Port (Proc 000, Word 3). The extension number shown is only an example.

NOTE

The default BCCOS 0 through 8 should not be modified to support AUDIX networking. If a custom BCCOS is required, create a new BCCOS using the default values shown in PROC 014, Words 1 and 2. Refer to the DEFINITY Generic 2 Administration Procedures manual (555-104-506) if needed.

The BCCOS 6 default parameters are also shown in Figure 9-6,Manager II Administration of a DCP Port (Proc 014, Word 1), and Figure 9-7,Manager II Administration of a DCP Port (Proc 014, Word 2).

	ENHANCED	MODE - PROCEDURE: 000, WORD: 3
	SINGLE TERMINAL - MISCELLANEOUS FEATURES
1.		Extension:	32330
2.		Hot Line:	0	Not a hot line
3.	Dedicated Switch Connection	Messages:	0	Not supported (TDM, PDM, DTDM)
4.	Audible Message Waiting - Automatic:		0	Disabled

5.Bearer Capability Class of Service: 6

6.Universal Code Calling ID: ---

Connected to CC0 ON-LINE ♥

MAJOR

MINOR

RUN TAPE

BUSY OUT

IN USE

WAIT

enter command: _

3 Data

5 Help 6 Field 7 Input 8 Cmds

Figure 9-5.Manager II Administration of DCP Port (Proc 000, Word 3)