AT&T 585-300-903 manual DCP Cabling and Administration

DCP Cabling and Administration 9-3

_______________________________________________________________________________________

_

EXAMPLE:

To reach this port

you dial *19

To reach this port

you dial *18

POWER

P

R

O

C

E

S

S

O

R

008D

25

24

23

22

21

20 19 18

008D

33

32

31

30

29

28

27

26

SLOT	POWER	0	1	2	3	4	5
	SUPPLY
ID:
	SLOT				LEAVE THIS SLOT EMPTY

Figure 9-2.MERLIN II Default Configuration and Slot Assignments

2.At the rear of the AUDIX cabinet is a 25-pair female connector labeled ACC or ACCE. Connect the 25-pair male connector of the H600-331, Group 1 cable to this ACC connector. Or connect the 25- pair male connector of a 356A adapter to this connector. Either setup will provide you with the two D8W-87 female modular connectors required. The H600-331, Group 1 modular connectors should have 451A adapters on the ends. Figure 9-3,AUDIX to MERLIN II Connectivity, shows a 356A adapter being used.

3.Plug one end of a DW8-87 cord (male-male) into Jack No. 1 of the 356A adapter or Connector 1 of the H600-331, Group 1 cable. If the AUDIX system is within 5 feet of the MERLIN II, the 451A adapter can be removed from Connector 1, and Connector 1 (an D8W-87 male connector) can be used in the next step.

Repeat this step with the second D8W-87 cord. Use Jack No. 2 of the 356A adapter or Connector 2 of the H600-331, Group 1 cable.