AT&T 585-300-903 manual Switch Administration, MPDM/M1* Option Settings

EIA RS-232 Cabling 8-9

_______________________________________________________________________________________

_

Table 8-1.MPDM/M1* Option Settings

_________________________________
⎜	MPDM/M1* Option Settings		⎜
⎜			⎜
⎜ speed		56 Kbps or 64 Kbps	⎜
⎜ OFF-TRBK		OFF	⎜
⎜			⎜
⎜ HDX-FDX		OFF (FDX)	⎜
⎜ ASYN-SYNC		SYNC	⎜
⎜ EXT-INT		EXT	⎜
⎜			⎜
⎜ OFF-DISC		OFF	⎜
⎜ OFF-KYBD		OFF	⎜
⎜			⎜
⎜ OFF-PRTY		OFF	⎜
⎜ O/EV-I/OD		O/EV	⎜
⎜ OFF-DMLL		OFF	⎜
⎜			⎜
⎜ OFF-MKBY		MKBY	⎜
⎜ OFF-ANET		ANET	⎜
⎜			⎜
⎜ OFF-SIGLS		SIGLS	⎜
⎜ OFF-AANS		AANS	⎜

SWITCH ADMINISTRATION

The only administration required at the switch is the translation of the new analog or DCP ports for communication with the appropriate endpoints. For analog port translations, see the appropriate switch documentation. For DCP port translations, see Chapter 9, DCP Cabling and Administration.

NOTE

Remember, if you are using MPDM/M1* data modules to convert RS-232 ports to DCP mode 1 or DCP mode 3, these ports can only be used for incoming calls. Consequently, these data modules must be administered as the first members of an incoming hunt group on the switch and the DCP ports should be administered as the remaining members of the hunt group.