HP Integrity iLO 2 MP 5991-6005 Fail for a few of reasons, Is being used, User Login, Are allowed

Terminating an Auto-Login Session

When the Auto-Login CLI or Web GUI session is terminated, the following user clean up is preformed:

•For Auto-Login sessions, the temporary Auto-Login iLO 2 MP account is deleted when the session with the iLO 2 MP is terminated.

User Account Cleanup during IPF Blade Initialization

OA and iLO 2 MP perform the following during an IPF blade initialization

•When a server blade is inserted, or iLO 2 MP or OA is reboot or reset, both OA and iLO perform cleanup of the accounts that could have been created for auto-login before the reset.

•When iLO 2 MP initializes, OA marks all four user slots as unused.

•iLO scans its local user accounts. If there are any OA created user accounts, they are deleted from iLO user database.

Auto-Login Troubleshooting

There may be times when Auto-Login fails. The following information provides possible reasons for the failure

User Creation	When OA sends a request to iLO 2 MP to create a new user, iLO attempts
	to create a user in the local iLO user database. Creation of an OA user could
	fail for a few of reasons:
	• The local user database is disabled in iLO and LDAP authentication
	is being used.
	• MP user database has reached the maximum number of users (19
	users).
	• There is already a user registered with the same login name
User Login	After an OA user has been created in the MP database, OA user login can
	still fail for a number of reasons:
	• iLO 2 MP upgrade is currently in progress, and no new connections
	are allowed.
	• Maximum number of connections for the requested connection type
	(SSH, Telnet, web GUI) to iLO 2 MP has been reached.
	• Requested connection type (SSH, Telnet or web) to iLO is currently
	disabled.
User Deletion	When OA sends a request to iLO 2 MP to delete a user, iLO 2 MP attempts
	to delete that user from the local iLO user database. Deletion of an OA user
	could fail for a couple of reasons
	• A user with the specified login doesn't exist (could have been deleted
	through other iLO UI)
	• The specified user cannot be deleted because it is the only user in the
	local database with user administration right.

Connecting the Server Blade to the iLO 2 MP Using the Console Serial Port

If the enclosure is not connected to any network, you must configure your server through the console serial port (RS-232) on the SUV cable. Use this procedure to configure the console serial port to enable iLO 2 MP access. To perform this procedure, you need a terminal emulator (for example, a laptop using hyperterm) to connect to the server blade.

Physically Connecting the Server Blade to the iLO 2 MP 43