HP Integrity iLO 2 MP 5991-6005 manual ILO 2 MP Status LEDs

NOTE: This figure is oriented vertically to match the orientation of the core I/O board.

Figure 2-4 HP Integrity rx3600 and rx6600 Server Rear Ports and LEDs

1iLO 2 MP Serial Console Port (RS-232) (DB-9F to DB-9F cable) Connected to emulation terminal device

(PC, laptop, or ASCII terminal)

2General Use Serial Port (Printers, etc.)

3USB 2.0 Ports (any USB device)

4iLO 2 MP LAN Port (10/100 LAN)

5VGA Port (No iLO 2 MP access; EFI only)

iLO 2 MP Status LEDs

Table 2-1lists the state of the iLO 2 MP status LEDs during normal operation.

Table 2-1 iLO 2 MP Status LEDs

iLO 2 MP Status LED	LED State
Standby Power	Solid green.
iLO 2 MP Self Test	Off. The LED is solid amber when ac power is first applied. It remains solid amber for
	a few seconds until the MP completes its self test; then the LED turns off.

30 Ports and LEDs