HP Integrity iLO 2 MP 5991-6005 Firmware Revision Display and Upgrade, SM CLP Firmware Targets

Starting a System Console Session

To start a system console session, enter the following command:

</>hpiLO->start /system1/consoles1/textredirectsap1

Determining the Session Termination Character Sequence for the System Console

To determine the session termination character sequence for the system console, enter the following command:

</> hpiLO-> show -d properties=SessionTerminateSequence

/system1/consoles1/testredirectsap1 status 0

status_tag=COMMAND COMPLETED

/system1/consoles1/testredirectsap1 Properties

SessionTerminateSequence=Esc (

Exiting the System Console Session and Returning to SM CLP

To exit the system console session and return to SM CLP, enter Esc + ( at the system text console.

Entering the MP Main Menu Interface From SM CLP

To enter the MP Main Menu from SM CLP, enter the following command: </>hpiLO->start

/map1/textredirectsap1

Exiting the MP Main Menu Session and Returning to SM CLP

To exit the MP Main Menu interface and return to the SM CLP session, enter SMCLP

Firmware Revision Display and Upgrade

This section describes how to view firmware revisions in the system.

Each installed firmware in the system known to MP (MP FW, BMC FW, EFI FW, System FW, and so on) is represented by a swid target.

•/map1/swinstallsvc1 represents iLO 2 MP’s ability to install firmware.

•/map1/swinventory1 represents a collection of all swids installed in the system.

SM CLP Firmware Targets

This section describes targets, target properties, and supported verbs necessary to implement the firmware model in SM CLP.

Target: map1/swinstallsvc1

SoftwareInstallationService provides the ability to transfer images into a managed element from a source location, local or remote (such as the ability to upgrade firmware).

Table 6-36shows swinstallsvc1 target properties.

Table 6-36 swinstallsvc1 Properties

Property Name	Description	Access and Values
Description	Provides a textual description of the object.	Read-only
		The value is set to firmware
		installation service.

Verbs

134 Using iLO 2 MP