HP Integrity iLO 2 MP 5991-6005 manual ILO 2 MP Reset Button, Console Serial Port Pinouts

Table 2-1 iLO 2 MP Status LEDs (continued)

iLO 2 MP Status LED	LED State
iLO 2 MP Heartbeat	Flashing green.
BMC Heartbeat	Flashing green.

iLO 2 MP Reset Button

The iLO 2 MP Reset button enables you to reset the iLO 2 MP and reset the user-specific values to factory default values. A momentary press causes a soft reset of the iLO 2 MP when the button is released. A greater than four second press causes a soft reset of the iLO 2 MP upon release and resets local user accounts and passwords to factory default values.

Resetting Local User Accounts and Passwords to Default Values

If iLO 2 MP user passwords are lost, or iLO 2 MP local user accounts are disabled and logging in through LDAP directory server is unsuccessful because the directory server is down or directory settings have not been configured properly in LDAP command, you can reset local user accounts and passwords to their default values.

To reset local user accounts and passwords to default values, follow these steps:

1.Connect a serial terminal (or serial-cabled laptop with serial emulation) to the console serial port.

2.Press and hold the iLO 2 MP Reset button for more than four seconds. The iLO 2 MP reboots to factory default settings automatically.

3.Respond to the prompt to reset local user accounts and passwords to default values.

Console Serial Port and Auxiliary Serial Port

Figure 2-5shows the console serial port connector with numbered labels for each pin on each port.

Figure 2-5 Console Serial Port (RS-232) Connector

5 9

4 8

3

2 7

1 6

Table 2-2maps the console serial port connector pin number to its signal description on each port.

Table 2-2 Console Serial Port Pinouts

Pin Number	Signal Description
1	Not used
2	Receives data
3	Transmits data
4	Not used
5	Ground
6	Not used

iLO 2 MP Reset Button 31