HP Integrity iLO 2 MP 5991-6005 manual Target map1/sshsvc1, Disable Telnet Service

Target: map1/telnetsvc1

The telnetsvc1 target represents the telnetsvc service provided by map1.

Table 6-39shows telnetsvc1 target properties.

Table 6-39 telnetsvc1 Properties

Property Name		Description	Access and Values
EnabledState		Shows whether telnet is enabled or disabled.	Read-only
			The following are valid values:
			Enabled, Disabled
Protocol		The protocol this service provides.	Read-only
			Set to telnet
Verbs
start	Enables iLO 2 MP telnet service.
show	Displays information.
stop	Disables iLO 2 MP telnet service.
help	Displays context-sensitive help.

Telnet Examples

The following examples show specific telnet commands.

Enable Telnet Service

</>-> start /map1/telnetsvc1

Disable Telnet Service

</>-> stop /map1/telnetsvc1

SSH

This section describes targets, their properties, and supported verbs necessary to enable or disable SSH access to the iLO 2 MP.

Target: map1/sshsvc1

The sshsvc1 target represents the SSH service provided by map1.

Table 6-40shows sshsvc1 target properties.

Table 6-40 sshsvc1 Properties

Property Name		Description	Access and Values
EnabledState		Shows whether SSH service is enabled or	Read-only
		disabled.	The following are valid values:
			Enabled, Disabled
Protocol		The protocol this service provides.	Read-only
			Set to SSH.
Verbs
start	Enables iLO 2 MP SSH service.
stop	Disables iLO 2 MP SSH service.
show	Displays information.
help	Displays context-sensitive help.

SMASH Server Management Command Line Protocol 137