HP Integrity iLO 2 MP 5991-6005 manual User Accounts Configuration, Target map1/group1

Verbs
show	Displays information.
help	Displays context-sensitive help.
set	Sets a property to a specific value.

SM CLP vMedia Use Cases

The following examples show actions you can perform using SM CLP for vMedia.

Change the current context to the CD drive. –> cd / map1 / oemhp_vm1 / cddr1

Show the current status to verify that the media is not in use. –> show

Insert the desired image into the drive.

–> set / oemhp_image=http://my.imageserver.com/ISO/install_disk1.iso Connect the media.

–> set / oemhp_connect=yes Disconnect vMedia.

This command disconnects the media and clears the oemhp_image value.

–> set / map1 / oemhp_vm1 / cddr1 oemhp_connect=no

User Accounts Configuration

This section describes targets, their properties, and supported verbs used for configuring and viewing iLO 2 MP user accounts using SM CLP.

Target: map1/group1

The group1 target represents a collection of user accounts on the iLO 2 MP.

Table 6-50shows group1 target information.

Table 6-50 group1 Properties

Property Name		Description	Access and Values
Description		Textual description of this collection	Read-only
		target.	Set to collection of user accounts.
Verbs
cd	Changes the current default target.
help	Displays context-sensitive help.
show	Displays information.

Target: map1/group1/account#

The account# target represents a user account on this iLO 2 MP where # is the instance number of the specific account. You can configure up to 19 user accounts on the iLO 2 MP.

Table 6-51shows account# target properties.

Table 6-51 account# Properties

Property Name	Description	Access and Values
UserID	Login name of this user	Read/write.
	account.	Specified in ASCII characters up to 24 characters long.
UserPassword	User password.	Read/write.
		Specified in ASCII characters and must be least six characters long.

SMASH Server Management Command Line Protocol 143