Installation and Connection | DRS5116 |
|
|
9.2.Connecting & Configuring Relay Out
9.2.1.Specifications
In order to operate the relay outputs of the DRS Digital Recording Solution (all models) normally, the following conditions are required.
| Output Ch. | 4Ch. Relay differential outputs |
|
|
|
Spec. | Output type | Dry Contact |
|
|
|
| Connecting type | Connect the trimmed wire to the screwless terminal block |
|
|
|
| DC | 24V DC, 1.25A, 30W |
Rating |
|
|
| 125V DC, 0.24A, 30W | |
|
|
|
| AC | 125V AC, 0.5A, 62.5VA |
|
|
|
9.2.2. Connecting Relay Out
When connecting R1 ~ R4 refer to the following diagram. This diagram shows connection to a warning light.
Wren | 2003. 09. 06 (v 1.0) | 38 |
