Wren Associates DRS5004 Setting Remote Controller, Setting ID of DRS Digital Recording Solution

Installation and Connection DRS5116

6. Setting Remote Controller

6.1. Setting ID of DRS Digital Recording Solution

When controlling several DVRs with one remote controller, set Remote Control ID as follows:

(1)Press the [MENU] button.

(2)Select “System” using the [►►] button and press the [ENETR] or [▼] buttons.

(3)Select “Miscellaneous” from the sub-menu list using the [▼] button and press the [ENETR] button.

(4)Select “Remote Control ID,” and press the [ENETR] button.

(5)Select a value using the [◄◄/►►] buttons and press the [EXIT] button.

(6)Press the [EXIT] button to exit the Settings Page and return to the monitor mode.

<Note> Remote Control ID

Up to 16 DVRs can be controlled with a single remote controller.

Set the Remote Control ID to “Off”, if the remote controller is not being used.

Wren 2003. 09. 06 (v 1.0) 24