Basic Configuration | DRS5116 |
|
|
14.9. Using Screen Lock
The screen lock is used to lock againt unauthorized users when the administrator is not at his desk. - For this function to operate properly, the user password should be set.
-While pressing the [EXIT/LOCK] button for 2~3 seconds, the Lock mode will run with a “Screen Locked” message on the screen. When the “User Password” is set to off, the message “Enable user password first” shows on the screen.
-If lock mode is enabled, all function buttons will be unoperational.
-In order to cancel lock mode, user password must be entered.
Wren | 2003. 09. 06 (v 1.0) | 66 |
