Wren Associates DRS5004 Viewing an Alarm Triggered Channel, Viewing Images with Digital Zoom

Basic Configuration DRS5116

14.5. Viewing an Alarm Triggered Channel

-When an alarm is triggered, the related channel will automatically pop-up full screen.

-Set ‘Alarm Pop-up Screen’ function to “On” in “Configuration” under the “Monitor” tab, and set the display duration in “Pop-up Hold (sec)”

-If more than one channel is triggered by an alarm, the related channels will be displayed simultaneously in a split-screen. In order to move the current screen, press any button.

14.6. Viewing Images with Digital Zoom

-In the Single Full Screen mode, live and recorded images can be expanded using the Digital Zoom feature.

-To enable the digital zoom, press the [ZOOM] button.

-Digital Zoom will expand the image to twice its normal size.

-The default location of the digital zoom is in the center of screen. The zoom box can be moved each 10th step to the left and right and 7th step up and down.

-To move the zoom box, use the [Arrow] button.

-To cancel the zoom box, press the [ZOOM] button once more.

14.7. Viewing with Connected PTZ

-Pan/Tilt/Zoom (PTZ) devices can be controlled through the HVR-16E when a PTZ device is connected and properly configured under “Serial Setup.”

-While in the monitoring mode, press the [SELECT] button.

-A Channel selection icon will be displayed.

-Move the icon to the channel to control with the [Arrow] button. (When controlling in the single full screen, select the [SELECT] button.)

-Press the [MENU] button, then PTZ menu (Pan/Tilt, Zoom/Focus, Load Preset, Save Preset) will appear.

-Press the [ENTER] button after selecting the desired function

14.7.1. Controlling Pan/Tilt

To control Pan and Tilt during live image monitoring mode:

-Press the [SELECT] button. Move the “Select” icon to the desired channel.

-Press the [MENU] button.

-Select ‘Pan/Tilt’ from the PTZ menu.

-Control Pan and Tilt function using the up, down, left and right arrows.

Wren 2003. 09. 06 (v 1.0) 64