Installation Requirements
Table 4.2 Interface connector (SAS plug) signal allocation:CN1
Pin No. | Signal | Description |
S1 | GND | GND for SAS Primary Port |
S2 | RP+ | SAS Primary Port Receive(positive) signal |
S3 | RP- | SAS Primary Port Receive(negative) signal |
S4 | GND | GND for SAS Primary Port |
S5 | TP- | SAS Primary Port Transmit(negative) signal |
S6 | TP+ | SAS Primary Port Transmit(positive) signal |
S7 | GND | GND for SAS Primary Port |
S8 Note1 | GND | GND for SAS Secondary Port |
S9 Note1 | Reserved (not used) | Not used |
S10 Note1 | Reserved (not used) | Not used |
S11 Note1 | GND | GND for SAS Secondary Port |
S12 Note1 | Reserved (not used) | Not used |
S13 Note1 | Reserved (not used) | Not used |
S14 Note1 | GND | GND for SAS Secondary Port |
P1 Note2 | Reserved (not used) | Not used |
P2 Note2 | Reserved (not used) | Not used |
P3 Note2 | Reserved (not used) | Not used |
P4 | GND | GROUND |
P5 | GND | GROUND |
P6 | GND | GROUND |
P7 | ||
P8 | +5V | +5V power supply input |
P9 | +5V | +5V power supply input |
P10 | GND | GROUND |
P11 | READY LED | READY LED output |
P12 | GND | GROUND |
P13 | ||
P14 | +12V | +12V power supply input |
P15 | +12V | +12V power supply input |
Note 1) S8 - S14 are SAS Secondary Port signals, and not used on MAV2073RC and MAV2036RC.
Note 2) P1 to P3 are 3.3V power supply input and
