Fujitsu MAV2073RC, MAV2036RC manual Important Alert Items, Data loss

Important Alert Items

Task			Alert message	Page
Installation	2.	When dismounting the drive which is mounted on the		5-10
		system while power is not supplied to it.
		•	Do not move the drive until the drive stops completely (about 15
			seconds if the spindle motor was stopped by a START/STOP UNIT
			command, and about 15 seconds after powering-off when the power
			was simply turned off).
		•	Then, dismount the drive using the drive mounting/dismounting
			mechanism, etc. of the system.
		•	When storing or transporting the drive, put it in the antistatic bag
			(refer to Section 5.1).
Diagnostics	Data loss
and	Save data stored on the disk drive to other media before requesting repair.			6-5
Maintenance
	Fujitsu does not assume responsibility if data is destroyed during servicing
	or repair.
	Electreical shock
	1.	To avoid injury, do not touch the PCA.		6-5
	2.	Never use any solvents to clean the disk drive during operation
	Damage
	1.	Always ground yourself with a wrist strap connected to ground before		6-5
		handling. ESD (Electrostatics Discharge) may cause the damage to the
		device.
	2.	Never use a conductive cleaner to clean the HDD.
	3.	Never remove any labels from the drive or deface them in any way.
	4.	Never remove the PCA.
	5.	Never open the disk enclosure for any reason.
	Damage
	1.	Never remove any labels from the drive.		6-13
	2.	Never open the disk enclosure for any reason. Doing so will void any
		warranties.

iv C141-E219