6.2 Maintenance Information
6.2Maintenance Information
Data loss
Save data stored on the disk drive to other media before requesting repair. Fujitsu does not assume responsibility if data is destroyed during servicing or repair.
See Section 5.1 for notes on packing and handling when returning the disk drive.
6.2.1Precautions
Take the following precautions to prevent injury during maintenance and troubleshooting:
High temperature
To prevent injury, never touch the drive while it is hot. The DE and LSI become hot during operation and remain hot immediately after turning off the power.
Electreical shock
1.To avoid injury, do not touch the PCA.
2.Never use any solvents to clean the disk drive during operation.
Take the following precautions to prevent disk drive damage during maintenance and troubleshooting:
Damage
1.Always ground yourself with a wrist strap connected to ground before handling. ESD (Electrostatics Discharge) may cause the damage to the device.
2.Never use a conductive cleaner to clean the HDD.
3.Never remove any labels from the drive or deface them in any way.
4.Never remove the PCA.
5.Never open the disk enclosure for any reason.
