![](/images/backgrounds/361301/361301-072x1.png)
Tuning broadcast signals manually
Settings
Broadcasting
Expert Settings
Manual Tuning
You can scan for all the channels manually and store the scanned channels in the TV. To stop scanning, select Stop.
"" This function is only available on certain models in specific geographical areas.
Tuning digital channels
Settings
Broadcasting
Expert Settings
Manual Tuning
Digital Channel Tuning
Select New Search to scan for digital channels automatically and store the scanned channel list in the TV.
"" This function is only available on certain models in specific geographical areas.
Tuning analogue channels
Settings
Broadcasting
Expert Settings
Manual Tuning
Analogue Channel Tuning
Select New and configure Programme, Colour System, Sound System, Channel, and Search to scan for analogue channels. Then, select Store to store the scanned channels in the TV.
"" This function is only available for analogue broadcasts.
Channel mode
●● P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.
●● C (aerial channel mode) / S (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
Settings
Broadcasting
Expert Settings
Fine Tune
"" This function is only available for analogue broadcasts.
- 66 -