Basic Configuration | DRS5116 |
|
|
16.8.8. Miscellaneous
<Button control>
- Press the [MENU] button and select “Miscellaneous” below the “System” tab.
Remote Control ID
Up to sixteen DRS units can be controlled with a single IR Remote Control. Designate each unit with a unique number under the ‘Remote Control ID’ menu. When not using remote controller, set it as “Off”.
<How to set remote controller
>
-Aim the remote controller at the DRS5116.
-Press the “ID” button of the remote controller until the DRS reacts.
-If the remote controller’s ID agrees with the DRS, all the LEDs on the front panel of the DRS will light up and a buzzer will sound.
-OSD menus can now be set with the remote controller.
-For more information, please refer to the “ DRS Installation Guide”.
Keyboard Control Addr
This function is used to set the keyboard’s control address in order to operate all DRS5116’s menus with a keyboard. The default value is “32”. If several DRS5116s are connected with one keyboard, it can be
Wren | 2003. 09. 06 (v 1.0) | 105 |
