Installation and Connection | DRS5116 |
|
|
8.2. Setting Date & Time
(1)Press the [MENU] button, and select the “Quick Setup” tab.
(2)Select “Date/Time” and enter the Settings Page by pressing the [ENTER] button.
8.2.1. Time Zone
(1)Select the “Time Zone” and press the [ENTER] button to configure.
(2)Select a value using the [◄◄/►►] buttons and press the [EXIT] button when finished.
8.2.2. Daylight Saving
(1)“Daylight Saving Time” is only activated for time zones that use Daylight Savings. If activated, press the [ENTER] button to enter a new value.
(2)Select “On/Off” using the [◄◄/►►] buttons and press the [EXIT] button when finished.
8.2.3. Sync with NTP
In order to synchronize time with NTP (Network Time Protocol) server, select “On”.
(1)Select “Sync with NTP” using the [◄◄/►►] or the [▲/▼] buttons and press the [ENTER] button.
(2)Select “On/Off” using the [◄◄/►►] buttons and press the [EXIT] button.
Wren | 2003. 09. 06 (v 1.0) | 29 |
