Installation and Connection | DRS5116 |
|
|
9.1.Connecting and Configuring Sensor
9.1.1.Specification
In order to run sensor input of DRS series normally, the following conditions are required:
| Input Ch. | 16Ch. Photo coupler inputs *Model Dependant* | |
|
|
| |
Spec. | Input type | N.C. (Normal Close) / N.O. (Normal Open) type | |
|
| ||
Supported sensor | Dry contact | ||
| |||
|
|
| |
| Connecting | Connecting the trimmed wire to terminal block | |
|
|
| |
| Available input pulse | Min. 500ms | |
Performance | range |
| |
|
|
| |
| Output current | Typical DC 12mA | |
|
|
|
9.1.2. Connecting Sensor Input
Connect S1 ~ S16 (Model Dependant) referring to the following. It shows a dry contact connection. When connecting a
contact Wren Technical Support team.
* DRS 5016/5116 Series Shown *
Wren | 2003. 09. 06 (v 1.0) | 34 |
