Basic Configuration

DRS5116

 

 

16.8.6. Network

There are five sub-menus: Network, xDSL, HRS, Port Setting, and NTP Setting.

16.8.6.1. Network

This page is used to define the network type and se tthe network addresses for the DRS.

Type

This is to select proper network interface (Ethernet/xDSL) with which the DRS is connected. If theDRS is connected with an Internet dedicated line, a cable modem line or on a LAN environment, select the network interface as ‘Ethernet’.

If the DRS is connected on xDSL line that needs PPPoE process to connect to the Internet, the administrator should select ‘xDSL.’ However, if the xDSL line does not need PPPoE process, the administrator should select ‘Ethernet,’ even though the DRS is connected on xDSL line.

DHCP

This menu is for the lines that have Ethernet interfaces such as Internet dedicated line, cable modem line and LAN. If the administrator activates the ‘DHCP’ menu, all addresses are set automatically by the DRS detecting them from the DHCP server of your ISP. The detected addresses are not displayed on the screen. The addresses do not need to be entered manually unless the ‘DHCP’ is disabled

Wren

2003. 09. 06 (v 1.0)

100

Page 100
Image 100
Wren Associates DRS5004, DRS5116, DRS5016, DRS5008 manual Network, 100