Adding a PDU in the KVM GUI main page
1. Go to the Device Management tab, select the PDU Devices and click Add.
2.Select the PDU Model.
3.Assign a name to the PDU.
4.User Name - Enter the PDU administrator user name.
5.Password - Enter your password.
6.Set the Scan Interval - This is the amount of time which the KVM switch checks outlet status from the PDU (from 1 to 99 minutes). Short intervals are not recommended in order to minimize impact on Telnet/HTTP users accessing the PDU.
46 | KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual |
