Log Server.
Important transactions that occur on the KVM switch, such as logins and internal status messages, are kept in an automatically generated log file. See “Log” on page 90, for details on setting up the log server.
•Specify the MAC address of the computer that the Log Server runs on in the MAC address field.
•Specify the port used by the computer that the Log Server runs on to listen for log details in the Port field. The valid port range is
Note: The port number must different than the one used for the Program port.
SNMP Server. Enable to be notified of SNMP trap events:
1.Check Enable SNMP Agent.
2.Enter the IPv4 address, IPv6 address, or domain name of the computer to be notified.
3.Enter the port number. The valid port range is
Note: The logs that are notified of SNMP trap events are configured on the Notification Settings page under the Log tab. See “Log Notification Settings” on page 91 for details.
Syslog Server.
To record all the events that take place on KVM switches and write them to a Syslog server:
1.Check Enable.
2.Enter the IPv4 address, IPv6 address, or domain name of the Syslog server.
3.Enter the port number. The valid port range is
Authentication
Disable Local Authentication.
Selecting this option disables login authentication on the KVM switch. The switch can only be accessed using LDAP, LDAPS, MS Active Directory, RADIUS or KVM Access Management Server authentication.
KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual | 71 |
