Schneider Electric KVM2116P, KVM2132P, KVM1116P Fan Location and Speed Information, Fan Speed

Fan Location and Speed Information

KVM2132P / KVM2116P only

Fan Location

The KVM switch has 4 fans that feed realtime fan speed information to the WinClient / Java Client Device Management page. The fan speed is shown on the Device Information web page.

Fan Speed

Fan speed automatically adjusts according to temperature as follows:

•If any sensor senses that the temperature is greater than 32° C, all fans spin at half speed .

•If any sensor senses that the temperature is greater than 45° C, all fans spin at full speed.

•When all four sensors sense that the temperature is less than 40° C, all fans return to half speed.

•When all four sensors sense that the temperature is less than 30° C, all fans turn off.

Note: Fan half speed equals 2500 rpm. Fan full speed equals 5000 rpm.

Temperature Sensor Location and Information

KVM2132P / KVM2116P only

The KVM switch has 4 temperature sensors on its mainboard that feed realtime temperature updates to the WinClient / Java Client Device Management page. See Device Information, Temperature on page 67 for more information.

Note: The temperature inside the case can be higher than the ambient temperature (0-50° C). IC chips can tolerate temperatures of up to 105°C. If the temperature reading rises past 85° C, make the ambient temperature cooler or, shut the switch down until it cools off.

KVM-SERIAL Server Module Configuration and Operation

The KVM-SERIAL cable connects a serial device to the KVM switch.

Configuration

To configure the KVM-SERIAL Server Module to interact with the connected device, set its serial parameters to match the parameters of the device:

1.In the Port Access page Sidebar, select the port to which the KVM-SERIAL Server Module is connected.

2.Select Port Configuration on the menu bar. The page opens with the Port Properties tab selected.

KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 109