McIntosh MCC404/MCC404M manual How to Connect for Four Channels, McIntosh Control Center

How to Connect for Four Channels

How to Connect for Four Channels

1.Connect the cable from the Control Center Amp On to the MCC404/MCC404M ON Connector on the right

side of the amplifier.

Note: All cables should be connected to the amplifier before connecting the DC power cables to the battery.

2.Connect a cable from a McIntosh Control Center with Power Guard to the MCC404/MCC404M PG Connec- tor on the right side of the amplifier.

3.Connect cables (up to 12AWG) from four separate loudspeakers, to the Amplifier’s Channels 1, 2, 3 and 4 Terminals, being careful to observe the correct polari- ties.

4.Connect audio cables from the Control Center Outputs to the MCC404/MCC404M Inputs 1, 2, 3 and 4.

5.Optional Connection allows the SUB Outputs to be connected to a separate Subwoofer Power Amplifier, regardless of the MCC404/MCC404M Operating Mode used.

Note: The Subwoofer Outputs are line-level outputs and summed from all the Input Channels. They can be remotely controlled by connecting a cable from the SUB REMOTE CONTROL jack to the optional external rotary control.

6.Optional Connection allows the SUB REMOTE CON- TROL to be connected to the Power Amplifier, regard- less of the MCC404/MCC404M Operating Mode used.

7.Connect the MCC404/MCC404M to the vehicle bat-

tery terminals using size 4 AWG (Maximum) cables.

Note: It is advisable to place an in-line fuse of a suitable size as close as possible to the battery.

		Subwoofer
	Right Rear Output	Loudspeaker
McIntosh Control Center	Left Rear Output
	Left Front Output	Optional Subwoofer Amplifier
	Right Front Output

Right Front Loudspeaker

Right Rear Loudspeaker

Left Front Loudspeaker

-Vehicle + Battery

Fuse

Left Rear

Loudspeaker

8