|
|
| Specifications |
|
|
|
|
Specifications |
| ||
|
| Intermodulation Distortion | |
|
| ||
| Power Output Per Channel | ||
| 100 watts into 4 ohm loads and 200 watts into 2 ohm loads | Maximum Intermodulation Distortion if instanta- | |
| is the minimum sine wave continuous average power out- | neous peak output per channel does not exceed | |
| put per channel all four channels operating. | twice the rated output, for any combination of fre- | |
|
|
| quencies from 20Hz to 20,000Hz, with all channels |
| Power Output Bridged | operating is: | |
| 400 watts into 4 ohm loads is the minimum sine wave con- | 0.005% for 4 ohm loads | |
| tinuous average power output. | 0.007% for 2 ohm loads | |
|
|
| 0.007% for Bridged Mode with 4 ohm loads |
| Rated Power Band |
| |
| 20Hz to 20,000Hz | Input Impedance | |
|
|
| 12,000 ohms |
| Total Harmonic Distortion |
| |
Maximum Total Harmonic Distortion at any power level from 250 milliwatts to rated power output is: 0.005% for 4 ohm loads
0.007% for 2 ohm loads
0.007% for Bridged Mode with 4 ohm loads
Dymanic Headroom 1dB
Frequency Response
+0,
Sensitivity
0.5Volts
105dB (1.5V)
One Band Equalizer
Center Frequency is variable from 40Hz to 2,000Hz, level variable ±12db, Q fixed at 2
High Pass Filter
Variable from 5Hz to 5,000Hz, 12 db per octave
Low Pass Filter
Variable from 50Hz to 5,000Hz, 12 db per octave (24 db per octave in Bridged Mode)
Subwoofer Output
Low Pass filtered at 200 Hz with a 6db per octave slope (level variable ±12db when using optional McIntosh Exter- nal Subwoofer Rotary Control)
Power Requirements
12 Volts DC, 3.5 amps (idle) - 70 amps (100 watts)
Dimensions
12.25inches (31.1 cm) wide, 3.0 inches (7.6 cm) high, 18.4 inches (46.7cm) depth
Weight
20.2pounds (9.2 Kg) net, 23.2 pounds (10.5 Kg) in shipping carton
18
