HP Integrity iLO 2 MP 5991-6005 manual Remote Serial Console Window

types are used simultaneously by the users, some users may see unexpected results. Only one of the mirrored users at a time has write access to the console. Write access is retained until another user requests console write access. To get console write access, enter Ctrl-Ecf.

To ensure proper operation of the remote serial console, verify the following conditions:

•Your emulator can run the supported terminal type.

•The iLO 2 MP terminal setting in the applet is a supported setting.

•The operating system environment settings and your client terminal type are set properly.

•All mirrored consoles are of the same terminal type for proper operation. Supported terminal types are:

—VT100

—VT100+

—VT-UTF8

IMPORTANT: Do not mix hpterm and vt100 terminal types at the same time.

To connect to the system console (Figure 6-10), click Launch.

NOTE: If Launch is disabled, the user does not have console access right. See the User Administration page under the Administration tab to add the access right.

Figure 6-10 Remote Serial Console Window

Using this feature you can do the following:

94 Using iLO 2 MP