HP Integrity iLO 2 MP 5991-6005 ID System information settings, IT Inactivity timeout settings

HE displays the MP hardware and firmware version identity, and the date and time of firmware generation.

•If executed from the MP Main Menu, HE displays general information about the iLO 2 MP and those commands available in the MP Main Menu.

•If executed in command mode, HE displays the MP Help: Command Menu List. HE also displays detailed help information in response to a topic or command at the help prompt.

Command line usage and scripting:

HE [ -topic command ] [ -nc ] -?

ID: System information settings

Command access level: MP configuration access

ID displays and modifies the following:

SNMP contact person	Name, telephone, e-mail, and pager number.
Server information	Location, rack ID, position, asset tag.
System host name	The system host name of the operating system.
	NOTE: The system host name information is not retained across
	iLO 2 MP reboots.

Command line usage and scripting:

ID [ { -host [ <text> ] }

{ -person [ -name <text> ] [ -telephone <text> ] [ -email <text> ] [-pager <text> ] }

{ -server [ -location <text> ] [ -rackid <text> ] [ -position <text> ] } ]

[ -tag <text> } ] [ -nc ] -?

IT: Inactivity timeout settings

Command access level: MP configuration access

IT prevents sessions on the system from being inadvertently left open. When you initiate an iLO 2 MP command, other users are prohibited from running any commands until the first command has been completed or until it times out. Command interface inactivity timeout specifies that timeout value. This prevents a user from inadvertently keeping the iLO MP locked in a command, preventing other users from running iLO 2 MP commands.

NOTE: The iLO 2 MP command interface inactivity timeout cannot be deactivated.

Use the flow control timeout to prevent any user who is using a terminal that does not obey flow control from locking the system out from other users.

The following are IT command parameters:

iLO 2 MP inactivity timeout	One to 30 minutes (default is three minutes).
Flow control timeout	Zero to 60 minutes. If the flow control timeout is set to
	zero, no timeout is applied. A mirroring flow control
	condition ceases when no flow control condition exists on
	any port. This timeout prevents mirrored flow control from
	blocking other ports when inactive.

Command line usage and scripting:

IT [ -command <n> ] [ -flow <n> ] [ -nc ] -?

See also: SA

Text User Interface 71