HP Integrity iLO 2 MP 5991-6005 Domain Name Server, 25lists the fields, buttons, and descriptions

Figure 6-27 Standard Page

NOTE: The BL c-Classtab is available only on HP Integrity server blades.

Table 6-25lists the fields, buttons, and descriptions.

Table 6-25 Standard Page Description

Fields and Buttons	Description
MAC Address	The 12 digit (hexadecimal) MAC address.
DHCP Status	Enable or Disable.
iLO 2 MP Host Name	The host name set here is displayed at the iLO 2 MP Command interface prompt.
IP Address	The iLO 2 MP IP address. If DHCP is being used, the IP address is automatically
	supplied.
Subnet Mask	The subnet mask for the iLO 2 MP IP network. If DHCP is being used, the subnet mask
	is automatically supplied.
Gateway Address	The IP address of the network gateway. If DHCP is being used, the gateway IP address
	is automatically supplied.
Link State	Auto Negotiate or 10 BaseT option.
Submit	Submits the information.
Cancel	Cancels the action.

Domain Name Server

The Domain Name Server (DNS) page (Figure 6-28) enables you to configure the DNS server settings, domain name, and up to three DNS servers manually or automatically through DHCP. It further enables a DDNS update through the primary DNS server as long as it is authoritative for the zone. You must have iLO configuration access right to use this feature.

118 Using iLO 2 MP