HP Integrity iLO 2 MP 5991-6005 manual Power Meter Readings Page Description

Figure 6-18 Power Meter Readings Page

NOTE: The BL c-Classtab is available only on HP Integrity server blades.

IMPORTANT: Power consumption data readings are dependent on the configuration, architecture, components, and levels of activity of the server at any given time.

Table 6-16lists the fields, buttons, and descriptions.

Table 6-16 Power Meter Readings Page Description

Fields and Buttons	Description
Power Meter Readings	Data is displayed using a bar graph. Each bar represents the power usage taken over
	a five minute interval. Peak and average power usage are displayed by default. You
	can display or hide peak, average, and minimum power samples by using the
	appropriate checkbox. Samples are collected over a 24–hour period. Samples are not
	retained over a management processor or server reset. Data can be displayed in Watts
	or Btu/hr.
	To display a tool tip that indicates the power usage, power regulator mode, temperature,
	and timestamp, pause the mouse over the particular sample on the bar graph.
Peak	Displays the peak power reading from the server over the last 24-hour period.
Average	Displays the average power reading from the server over the last 24-hour period.
Minimum	Displays the minimum power reading from the server over the last 24-hour period.
24-hour Power History	The 24-hour History section displays the average, maximum, and minimum power
Section	averages. The peak and minimum samples are recorded along with the average of the
	averages from the 24-hour time period.
Average Power	Displays the average of the power readings from the server over the last 24-hour period.
	If the server has not been running for 24 hours, the value is the average of all the
	readings since the server was booted.

106 Using iLO 2 MP