HP Integrity iLO 2 MP 5991-6005 manual Ldap Configuration, User Account Examples

Table 6-51 account# Properties (continued)

Property Name		Description	Access and Values
Name		User name of this account.	Read/write.
			Specified in ASCII characters up to 24 characters long.
oemhp_privileges		Privileges of this user account.	Read/write.
			The following are valid values:
			<console,power,mp,user,virtual),
			<all> or <none>.
Verbs
cd	Changes the current default target.
help	Displays context-sensitive help.
show	Displays information.
set	Sets a property to a specific value.
create	Create a new user account.
delete	Delete a user account.

User Account Examples

The following examples show specific user account commands.

Display all user accounts on this iLO 2 MP

</> hpiLO-> show /map1/group1/account*

Create a new account

</map1/group1> hpiLO-> create account3 userid=testuser userpassword=testpass name=”Test User” oemhp_privileges=console,power

Delete an account

</map1/group1> hpiLO-> delete account1

Modify account properties

</map1/group1/accuont3> hpiLO-> set oemhp_privileges=console name=”Console User”

LDAP Configuration

This section describes targets, their properties, and supported verbs used for configuring and viewing iLO 2 MP LDAP settings using SM CLP.

NOTE: You can only configure LDAP with extended HP schema from the SM CLP interface.

You can configure LDAP with default schema using the iLO 2 MP web GUI or the iLO 2 MP Command menu.

Target: map1/settings1/oemhp_ldapsettings1

The oemhp_ldapsettings1 target represents iLO 2 MP LDAP directory configuration settings.

Table 6-52shows oemhp_ldapsettings1 target information.

144 Using iLO 2 MP