HP Integrity iLO 2 MP 5991-6005 manual System Power Restore, Settings, When ac was removed or lost

Table 6-15 Power & Reset Page Description (continued)

Fields and Buttons	Description
System Power Restore	This option enables you to configure the power restore policy. The power restore policy
Settings	determines how the system behaves when ac power returns after an ac power loss.
	You must have iLO configuration access right to use this option.
	• Restore Previous Power State: The power is restored to the state that was in effect
	when ac was removed or lost.
	• Automatically Power On: The system is powered up after ac is applied.
	• Remain Powered Off: The system will stay powered off after ac is applied; pushing
	the system power switch or choosing the 'Power On' option under 'System Power
	Control' is required to power on the system.
System Reset	This feature has the following options:
	• Reset through RST signal: This option causes the system to reset through the RST
	signal. Under normal operation, shut down the OS before issuing this command.
	Execution of this command irrecoverably halts all system processing and I/O activity
	and restarts the computer system. The effect of this command is very similar to
	cycling the system power - the OS is not notified, no dump is taken on the way
	down, and so on. You must have power control access right to issue this option.
	• Reset through INIT or TOC signal: This option causes the system to be reset through
	the INIT or Transfer of Control (TOC) signal. Under normal operation, shut down
	the OS before issuing this command. Execution of this command irrecoverably halts
	all system processing and I/O activity and restarts the computer system. It is different
	from the previous option in that the processors are signaled to dump state on the
	way down. You must have iLO configuration access right to issue this option.
BMC	This feature has the following options:
	• Reset BMC passwords: This resets BMC (EFI Shell) passwords.
	• Reset BMC: This option enables you to issue a BMC reset. Under normal operation,
	shut down the OS before issuing this command. You must have iLO configuration
	access right to issue this option.
iLO 2 MP	This feature has the following options:
	• Reset to the iLO 2 MP default configuration: This option enables you to set all iLO
	2 MP parameters back to their default values. You must have iLO configuration
	access right to issue this option.
	• Reset the iLO 2 MP: This option enables you to reset the iLO 2 MP. You can safely
	perform an iLO 2 MP reset without affecting the operation of the server. You must
	have iLO configuration access right to issue this option.
Submit	Click to submit selections.

Power Meter Readings

The Power Meter Readings page (Figure 6-18) enables you to graphically view and monitor server power usage, temperature, and power regulator settings.

NOTE: Power meter readings is a licensed feature and requires the Advanced Pack license.

The Power Meter Readings page has two sections: Power Meter Readings and 24-hour Power History.

Web GUI 105