HP Integrity iLO 2 MP 5991-6005 manual Map1 iLO 2 Target, Displaying Power Status, Target map1

</>hpiLO-> reset system1 status=0 status_tag=COMMAND COMPLETED system1 has been issued a reset

Displaying Power Status

To display the power state of the system, query the value of the enabledstate property of the system1 target. For example:

</>hpiLO-> show -d properties=enabledstate system1 status=0

status_tag=COMMAND COMPLETED /system1

Properties EnabledState=Enabled

Powering Off the System

To power off the system, apply the stop (graceful shutdown) or stop-force(power off) commands to the system1 target. For example:

</system1> hpiLO-> stop -f status=0 status_tag=COMMAND COMPLETED System is being powered off.

</system1> hpiLO-> stop status=0 status_tag=COMMAND COMPLETED

system has been requested graceful shutdown.

Powering On the System

To power on the system, apply the start command to the system1 target. For example:

</>hpiLO-> start system1 status=0 status_tag=COMMAND COMPLETED system1 has been powered on

Map1 (iLO 2) Target

Target: map1

The map1 target (management access point) represents the root of the iLO 2 MP namespace. Functions and information related to iLO 2 MP are located under the map1 target.

Table 6-33shows map1 target properties.

Table 6-33 map1 Properties

Property Name		Description	Access and Values
Dedicated		Indicates whether the computer	Read-only
		system is a special purpose system	Set to management.
		(for example, dedicated to a
		particular use), or a
		general-purpose system.
Name		Name that identifies the iLO 2 MP.	Read-only
			Set to iLO 2 Advanced, HP Integrity.
Verbs
show	Displays information.
help	Displays context-sensitive help.

SMASH Server Management Command Line Protocol 131