HP Integrity iLO 2 MP 5991-6005 manual BL c-Class, Click OK and reset the iLO 2 MP

NOTE: If SNMP was disabled earlier and then enabled, you will receive the following message:

Reset MP (XD command option ‘R’) for configuration to take effect.

Click OK and reset the iLO 2 MP.

BL c-Class

The Onboard Administrator page (Figure 6-30) is used to facilitate the cabling and initial installation of servers blade. It also provides a quick view of the enclosure status. You must have configuration access right to turn the enclosure locator UID LED on or off.

Figure 6-30 Onboard Administrator

NOTE: The BL c-Classtab is available only on HP Integrity server blades.

Table 6-28lists the fields and descriptions.

Table 6-28 Onboard Administrator Page Description

Field	Description
OA IP Address	The IP address of the onboard administrator.
OA MAC Address	The MAC address of the onboard administrator.
Active OA Sign In Page	Click this button to launch the Onboard Administrator Sign In page.
Rack Name	This is used to logically group together enclosures in a rack. The rack name is shared
	with the other enclosures in the rack.
Rack UID	This is the rack unique identifier.
Bay Number	The enclosure can support as many as eight HP Integrity server blades. When viewed
	from the rack front, the bays are numbered from left to right and from 1 to 8. The bay
	number is used to locate and identify a server blade.

Web GUI 121