NOTE: Both short and long reset button presses return the port default connection to the MP.

The iLO 2 MP mirrors the system console to the iLO 2 MP local and LAN ports. One console output stream is reflected to all connected console users. If several different terminal types are used simultaneously, some users can see unexpected results.

Command line usage and scripting:

CA [ -local ] [ -bit <n> ] [ -flow >softwarehardware> ] ] [ -nc ] -?

Server blade usage

CA [ -local ] [ -bit <n> ] [ -flow >softwarehardware> ] [ -mode ,auxilo> ] ] [ -nc ]

-?

See also: SA

DATE: Display date

Command access level: Login access

DATE displays the date, as best known to the iLO 2 MP. The iLO 2 MP clock is updated from the BMC/SFW and cannot be modified. The realtime clock is used only when the iLO 2 MP is first powered on or rebooted, until it can obtain the correct date from the BMC.

Command line usage and scripting:

DATE [ -nc ] -?

DC (Default Configuration): Reset all parameters to default configurations

Command access level: MP configuration access

DC sets all iLO 2 MP parameters back to their default values. To restore specific configurations to their default values, use the following commands:

MP IP configuration

: LC -all DEFAULT

Remote Access Configuration

: SA -all DEFAULT

Command Interface configuration

: IT -all DEFAULT

MP Security configuration

: SO -opt DEFAULT

MP Session configuration

: IT -all DEFAULT

MP User configuration

: UC -all DEFAULT

MP LDAP directory configuration

: LDAP -all DEFAULT

SNMP Configuration

: SNMP - all DEFAULT

Use any of the following methods to reset passwords in the iLO 2 MP:

In the UC command, change individual users or reset all users to default values.

Reset passwords by pressing the iLO 2 MP reset button on the back panel of your HP server for longer than four seconds. After the iLO 2 MP reboots, the local console terminal displays a message for five seconds. Responding to this message in time enables a local user to reset the passwords.

NOTE: All user information (logins, passwords, and so on) is erased when you use any of the previous reset methods.

Command line usage and scripting:

DC [ -all default [ -nc ] ] -?

DF: Display FRU information

Command access level: Login access

Text User Interface

69

Page 69
Image 69
HP Integrity iLO 2 MP 5991-6005 manual Date Display date, DF Display FRU information, Server blade usage, See also SA