HP Integrity iLO 2 MP 5991-6005 manual MAP address, 191

MAP address	This is the hierarchical graph of the UFiTs contained in the MAP’s AdminDomain. Each instance
space	starting at the AdminDomain is a node in the graph. Each supported association forms a link
	in the graph to another instance node, and so on, until a terminating instance node is
	encountered.
Media Access	Worldwide unique, 48-bit, hardware address number that is programmed in to each local area
Control (MAC)	network interface card (NIC) at the time of manufacture. In the Ethernet standard, every network
	connection must support a unique MAC value.
N
Network	An internal circuit board or card that connects a workstation or server to a networked device.
Interface Card
(NIC)
Network mask	A number used by software to separate a local subnet address from the rest of an Internet
	Protocol (IP) address.
Node	An addressable point or device on a network. A node can connect a computing system, a
	terminal, or various peripheral devices to the network.
O
Onboard	The Onboard Administrator (OA) is the enclosure management processor, subsystem, and
Administrator	firmware base used to support HP Integrity server blades and all the managed devices contained
	within the enclosure. The OA provides a single point from which to perform basic management
	tasks on server blades or switches within the enclosure. Utilizing this hardwired information,
	OA performs initial configuration steps for the enclosure, allows for run time management and
	configuration of enclosure components, and informs administrators about problems within the
	enclosure through e-mail, SNMP, or the Insight Display.
Options	Used in the SMASH SM CLP. Options control verb behavior.
Out-of-band	Server management capability that is enabled when the operating system network drivers or
System	the server are not functioning properly.
Management
P
Port	The location (socket) where Transmission Control Protocol/Internet Protocol (TCP/IP) connections
	are made. Web servers traditionally use port 80, the File Transfer Protocol (FTP) uses port 21,
	and telnet uses port 23. A port enables a client program to specify a particular server program
	in a computer on a network. When a server program is started initially, it binds to its designated
	port number. Any client that wants to use that server must send a request to bind to the
	designated port number.
Port Number	A number that specifies an individual Transmission Control Protocol/Internet Protocol (TCP/IP)
	application on a host machine, providing a destination for transmitted data.
POST	Power-On Self-Test. The series of steps that the host system CPU performs following power-on.
	Steps include testing memory, initializing peripherals, and executing option ROMs. Following
	POST, the host ROM passes control to the installed operating system.
Properties	Properties are attributes that are relevant to a target that are passed as parameters to the
	command. Property keywords map to properties of CIM class.
Protocol	A set of rules that describes how systems or devices on a network exchange information.
Proxy	A mechanism whereby one system acts on behalf of another system in responding to protocol
	requests.
R
Remote System	A system other than the one on which the user is working.

191