HP Integrity iLO 2 MP 5991-6005 UC User Configuration users, passwords, and so on, Command CO

TE <text> [ -nc ] -?

UC: User Configuration (users, passwords, and so on)

Command access level: User administration access

UC adds, modifies, re-enables, or deletes any of the following user parameters:

•Login ID

•Password

•User Name

•User Workgroup

•User Access Rights

•User Operating Mode

•User Enabled

There are two default users, Admin and Oper. The Admin user has all rights (C, P, M, U, and V). The Oper user has the console access right by default. You can change the configuration of these default users with the UC command.

All users have the right to log in to the iLO 2 MP and to run Status (Read-only) commands (view event logs, check system status, power status, and so on), but not to run any commands that alter the state of the iLO 2 MP or the system.

The following commands are available to all users: CL, DATE, DF, HE, LS, PS, SL, SS, SYSREV, TE, VFP, WHO, XD (status options)

An iLO 2 MP user can also have any or all of the following rights:

Console Access	Right to access the system console (the host OS). This does
	not bypass host authentication requirements, if any.
	Command: CO
Power Control Access	Right to power on, power off, or reset the server, and to
	configure the power restore policy.
	Commands: PC,PR, RS, TC
Local User Administration Access	Right to configure locally stored user accounts.
	Commands: UC
iLO 2 MP Configuration Access	Right to configure all iLO 2 MP settings (and some system
	settings, such as the power restore policy).
	Commands: BP, CA, CL, DC, DI, FW, ID, IT, LC, LDAP, LOC,
	PG, RB, SA, SO, XD
Virtual Media Access	Enables Advanced Pack license users the right to use the
	vMedia applet.
	NOTE: The vMedia feature is available only if you have
	the iLO 2 MP Advanced Pack license and the user vMedia
	access right.

Command line usage and scripting:

UC [ -new <login> —user <text> [ -workgroup <text> ]

[ -rights <ed> <consolemppoweruservirtualallnone> ] [ -mode <singlemultiple> ] [ -enable <ed> ]

[ -password <value> ] ]

[ -change <login> [-login<newlogin> ] [ -user <text> ]

[ -rights <ed> <consolemppoweruservirtualallnone> ] [ -workgroup <text> ] [ -mode <singlemultiple> ]

80 Using iLO 2 MP