HP Integrity iLO 2 MP 5991-6005 Target map1/dnsendpt1, Dnsendpt1 Properties, gateway1 Properties

Target: map1/dnsendpt1

The dnsendpt1 target represents the iLO 2 MP DNS client.

Table 6-45shows dnsendpt1 target properties.

Table	6-45 dnsendpt1 Properties
	Property Name	Description	Access and Values
EnabledState		Represents the state of iLO 2 MP	Read only
		DNS.	The following are valid values:
			Enabled: The iLO 2 MP DNS client is
			enabled.
			Disabled: The iLO 2 MP DNS client is
			disabled.
Hostname		Represents the host name currently	Read-only
		assigned to the iLO 2 MP.	iLO 2 MP current host name.
OtherTypeDescription		Textual description of this protocol	Read-only
		endpoint.	Set to DNS.
Verbs
cd	Changes the current default target.
help	Displays context-sensitive help.
show	Displays information.

Target: map1/enetport1/lanendpt1/ipendpt1/gateway1

The gateway1 target represents the gateway server.

Table 6-46shows gateway1 target properties.

Table 6-46 gateway1 Properties

Property Name	Description	Access and Values
AccessInfo	Represents the IP address of the gateway	Read/write
	server.	The value of the property must be expressed
		in dotted decimal notation.
AccessContext	Represents access context (description)	Read-only
	of this access point.	Set to default gateway.

Target: map1/dnsserver1, map1/dnsserver2, map1/dnsserver3

The dnsserver1, dnsserver2, and dnsserver3 targets represent the iLO 2 MP’s primary, secondary, and tertiary DNS servers respectively.

Table 6-47shows dnsserver1, dnsserver2, and dnsserver3 target properties

Table 6-47 dnsserver1, dnsserver2, dnsserver3 Properties

	Property Name	Description	Access and Values
AccessInfo		Represents the IP address of the DNS	Read/write
		server.	The value of the property must be expressed
			in dotted decimal notation.
AccessContext		Represents access context (description)	Read-only
		of this access point.	Set to DNS server.
Verbs
show	Displays information.
help	Displays context-sensitive help.

140 Using iLO 2 MP