HP Integrity iLO 2 MP 5991-6005 manual Sysrev Firmware revisions, See also PS, See also RS

SSdisplays the status of the system processors and which processor is the monarch.

The iLO 2 MP learns the system configuration through the events it receives from the system. There is usually a delay between any processor configuration change and what is displayed by this command. For the most up-to-date processor configuration information, use the EFI or BCH prompt.

Command line usage and scripting:

SS[ -nc ] -?

See also: PS

SYSREV: Firmware revisions

Command access level: Login access

SYSREV displays the current firmware revisions in the system.

Command line usage and scripting:

SYSREV [ -nc ] -?

Example:

MP:CM> SYSREV

Current firmware revisions

MP FW	:	F.01.57
BMC FW	:	75.12
EFI FW	:	ROM A 05.63, ROM B 05.60
System FW :		01.40
PDH FW	:	00.0d
UCIO FW	:	03.0a
PRS FW	:	00.08	UpSeqRev: 01, DownSeqRev: 01

TC: System reset through INIT or TOC signal

Command access level: MP configuration access

NOTE: During normal operation, shut down the OS before issuing this command.

TC resets the system through the INIT or TOC signal. Running this command irrecoverably halts all system processing and I/O activity and restarts the computer system. It is different from the RS command in that the processors are signaled to dump state as they shut down.

Command line usage and scripting:

TC [ -nc ] -?

See also: RS

TE: Send a message to other mirroring terminals

Command access level: MP configuration access

TE treats all displayable characters following the command as a comment. Characters typed are broadcast to the connected console clients when you press Enter. The string size is limited to 80 characters. Any extra characters are not broadcast to other console clients.

NOTE: The broadcast message is sent only to Command Menu clients, and does not include users connected to MP Main Menu functions.

Command line usage and scripting:

Text User Interface 79