HP Integrity iLO 2 MP 5991-6005 Additional Setup, Modifying User Accounts and Default Passwords

Figure 3-3 Connecting the SUV Cable to the Server Blade

Additional Setup

This section provides additional information to set up the iLO 2 MP.

Modifying User Accounts and Default Passwords

The iLO 2 MP comes preconfigured with default factory settings, including a default user account and password. The two default user accounts on initial login are:

•All Rights (Administrator) level user: login = Admin

password = Admin

•Console Rights (Operator) level user: login = Oper

password = Oper

Login and password are case sensitive.

TIP: For security reasons, HP strongly recommends you modify the default settings during the initial login session.

Make the following changes using any of the iLO 2 MP user interfaces.

To modify default account configuration settings, follow these steps:

1.Log in as the administrator to modify default user configuration settings

2.To modify default passwords, follow these steps:

a.Access the MP Main Menu.

b.Enter CM at the MP> prompt.

c.Enter UC at the MP:CM> prompt and follow the prompts to modify default passwords.

3.To set up user accounts, follow these steps:

a.Access the MP Main Menu.

b.Enter CM at the MP> prompt.

c.Enter UC at the MP:CM> prompt and follow the prompts to modify user accounts.

46 Setting Up and Connecting the Console