HP Integrity iLO 2 MP 5991-6005 manual VMedia

Determine Gateway Address

</>hpiLO-> show -d properties=accessinfo /map1/enetport1/lanendpt1/ipendpt1/gateway1

Set Gateway Address

</>hpiLO-> set /map1/enetport1/lanendpt1/ipendpt1/gateway1 AccessInfo=192.0.2.1

Determine Link State (Autosense)

</>hpiLO-> show -d properties=autosense /map1/enetport1

Set Link (Autosense)

</>hpiLO-> set /map1/enetport1 autosense=true AccessInfo=192.0.2.1

Enable/Disable DHCP

</>hpiLO-> stop /map1/dhcpendpt1

</>hpiLO-> start /map1/dhcpendpt1

Determine all DNS settings

</>hpiLO-> show /map1/settings1/dnssettings1

Determine IP Address of the DNS Servers (primary, secondary, and tertiary)

</>hpiLO-> show -d properties=AccessInfo /map1/dnsserver*

or

</>hpiLO-> show -d properties=DNSServerAddresses /map1/settings1/dnssettings1

Set Primary and Secondary DNS Server IPs

</map1/settings1/dnssettings1> set DNSServerAddressess=192.0.2.1, 192.0.2.4

Set Tertiary DNS Server IP

</map1/settings1/dnssettings1> set DNSServerAddressess=,,192.0.2.6

vMedia

NOTE: vMedia command verbs are only available on server blade systems.

This section provides information on SM CLP vMedia targets, properties, and supported verbs. It also lists examples of SM CLP vMedia use cases.

Target: map1/oemhp_vm1/cddr1

The cddr1 target represents the virtual CD-ROM device.

Table 6-49 cddr1 Properties

Property Name	Description		Access and Values
oemhp_image	The image path and name for vMedia	Read/write
	access.	The value is a URL with a maximum length
		of 80 characters.
oemhp_connect	Used to connect or disconnect a vMedia	Read/write
	device and display the connection status.	The following are valid values:
		•	Yes: Connect.
		•	No: Disconnect.
oemhp_applet_connected	Indicates if the Java applet is connected.	Read-only
		Set to .
		•	Yes
		•	No

142 Using iLO 2 MP