HP Integrity iLO 2 MP 5991-6005 manual Text Console Services, Map1 Example, Resetting the iLO 2 MP

reset Resets the iLO 2 MP.

Map1 Example

The following example displays information about map1:

</> hpiLO-> show map1 status=0 status_tag=COMMAND COMPLETED

/map1 Targets

dhcpendpt1

dnsendpt1

dnsserver1

dnsserver2

dnsserver3

enetport1

gateway1

group1

settings1

sshsvc1

swinstallsvc1

swinventory1

telnetsvc1

textredirectsap1

textredirectsvc1 Properties

Name=iLO Advanced, HP Integrity Dedicated=Management

Verbs

cd help show load reset </> hpiLO->

Resetting the iLO 2 MP

To reset the iLO 2 MP, run the reset command to the MAP1 target as in the following example:

</>hpiLO-> reset map1 status=0 status_tab=COMMAND COMPLETED iLO was issued a reset

Text Console Services

This section describes targets, their properties, and supported verbs necessary to implement the console services in SM CLP.

You can invoke the system console and the MP Main Menu from SM CLP.

Any text console service is represented by a dedicated to it textredirectsap target.

Target /map1/textredirectsvc1 represents iLO 2 MP’s ability to provide text console redirection service.

Opening the MP Main Menu from SM CLP

This section provides information on how to invoke the MP Main Menu from the SM CLP.

Target: map1/textredirectsap1

The textredirectsap1 target represents the MP Main Menu interface.

Table 6-34shows textredirectsap1 target properties.

132 Using iLO 2 MP