HP Integrity iLO 2 MP 5991-6005 manual DI Disconnect LAN, WEB, SSH or Console, DNS DNS settings

DF displays FRU information for FRU devices located behind the BMC. Information provided includes serial number, part number, model designation, name and version number, and manufacturer.

Command line usage and scripting:

DF [ -specific[ <fruid> ] -all ] [ -view <texthex> ] [ -nc ] -?

DI: Disconnect LAN, WEB, SSH or Console

Command access level: MP configuration access

DI disconnects LAN, web SSL, or SSH users from the iLO 2 MP. It does not disable the ports. To disable the ports, see the SA command for LAN/WEB/SSH/IPMI over LAN access. Use the TE and WHO commands to identify the connected users before running this command.

Command line usage and scripting:

DI [ -telnet] [ —web ] [ -ssh ] [ -nc ] -?

See also: EX, SA, TE, WHO

DNS: DNS settings

Command access level: MP configuration access

DNS configures the DNS domain name and up to three DNS servers either manually or automatically with DHCP. You can use this command only with DHCP enabled. You can also perform a DDNS update through the primary DNS server as long as it is authoritative for the zone.

If no DNS server IP addresses are specified, or the DNS domain is undefined, DNS is not used.

If an IP address was obtained through DHCP, an add name request is sent to the DDNS server if it is enabled and registered.

Command line usage and scripting:

DNS [ [ -server <ed> ] [ -domain <text> ] [ -name <ed> ]

[ -register <yn> ] [ -1ip <ipaddr> ] [ -2ip <ipaddr> ] [ -3ip <ipaddr> ] ] [ -all default ] [ -nc ]

-?

See also: LC

FW: Upgrade the MP firmware

This command is only available to authorized HP service personnel.

The MP firmware is packaged along with system, BMC, and FPGA/PSOC firmware. You can download and upgrade the firmware package from the HP website at: http://www.hp.com/go/bizsupport.

IMPORTANT: When performing a firmware upgrade that contains system programmable hardware, you must properly shut down any OS that is running before starting the firmware upgrade process.

Select the download for Integrity firmware and follow the directions provided in the release notes.

After the upgrade, reconnect and log in as user Admin and password Admin (case sensitive).

HE: Display help for menu or command in command menu interface

Command access level: Login access

70 Using iLO 2 MP