HP Integrity iLO 2 MP 5991-6005 manual Ldap Configuration Examples, oemhpldapsettings1 Properties

Table 6-52 oemhp_ldapsettings1 Properties

Property Name		Description	Access and Values
oemhp_dirauth		Represents the iLO 2 MP directory access	Read write.
		setting	Valid values are:
			DefaultSchema: enable directory authentication
			using default schema.
			ExtendedSchema: enable directory
			authentication using extended HP schema.
			Disabled: disable directory authentication
oemhp_localacct		Represents iLO 2 local user accounts access	Read write.
		setting.	Valid values are:
			Enable: enable local iLO 2 MP user accounts.
			Disabled: disable local iLO 2 MP user accounts.
oemhp_dirsrvaddr		IP address or hostname of the directory	Read write.
		server.
oemhp_ldapport		Directory server LDAP port number.	Read write.
			Valid values are: 636, 2000-2400.
oemhp_dirdn		iLO 2 MP object distinguished name.	Read write.
oemhp_usercntxt1		Directory user search context #1.	Read write.
oemhp_usercntx2		Directory user search context #2.	Read write.
oemhp_usercntxt3		Directory user search context #3.	Read write.
Verbs
cd	Changes the current default target.
help	Displays context-sensitive help.
show	Displays information.
set	Sets a property to a specific value.

LDAP Configuration Examples

Configure LDAP parameters.

This command:

</map1/settings1/oemhp_ldapsettings1> hpiLO-> set oemhp_dirauth= ExtendedSchema `oemhp_dirsrvaddr=192.0.2.1 oemhp_dirdn=cn=iLO2,ou=ManagementDevices,o=hp oemhp_usercntxt1=cn=user,ou= engineering,o=hp

Applies the following LDAP settings:

•Enable LDAP authentication with extended schema.

•Set LDAP IP address.

•Set iLO 2 DN name as it is configured in the directory server. In this example it is set to cn=iLO2,ou=ManagementDevices,o=hp.

•Set user search context #1. In this example it is set to cn=user,ou= engineering,o=hp.

SMASH Server Management Command Line Protocol 145