HP Integrity iLO 2 MP 5991-6005 manual Network Configuration, SSH Examples, Disable SSH Service

SSH Examples

The following examples show specific SSH commands.

Enable SSH Service

</>-> start /map1/sshsvc1

Disable SSH Service

</>-> stop /map1/sshsvc1

Network Configuration

Network commands enable you to display or modify network settings.

SM CLP Network Targets, Properties, and Verbs

This section describes targets, target properties, and supported verbs necessary to implement the iLO 2 MP network configuration through SM CLP.

Target: map1/enetport1

The enetport1 target represents capabilities and management of the iLO 2 MP Ethernet port.

Table 6-41shows enetport1 target information.

Table 6-41 enetport1 Properties

Property Name	Description	Access and Values
AutoSense	Specified if the iLO 2 MP AutoSense feature	Read/write
	is enabled. If it is disabled, iLO 2 MP	Boolean values accepted.
	network speed is set to 10 mb/s.

PermanentAddress Represents iLO 2 MP MAC address.

Read-only

The iLO 2 MP MAC address is formatted as twelve hexadecimal digits (10203040506) with each pair representing one of the six octets of the MAC address.

Verbs
cd	Changes the current default target.
help	Displays context-sensitive help.
show	Displays information.
set	Sets a property to a specific value.

Target: map1/enetport1/lanendpt1

The lanendpt1 target represents the iLO 2 LAN endpoint settings. Table 6-42shows lanendpt1 target properties.

Table 6-42 lanedpt1 Properties

Property Name	Description	Access and Values
EnabledState	Represents the iLO 2 MP LAN state.	Read-only
		The following are valid values:
		Enabled, Disabled

MACAddress Represents the iLO 2 MP MAC address.

Read-only

The MAC address is formatted as twelve hexadecimal digits (010203040506), with each pair representing one of the six octets of the MAC address.

Verbs

138 Using iLO 2 MP