NETGEAR M7100, M4100 CLI Configure Rapid STP 802.1w, Web Interface Configure Rapid STP 802.1w

ProSafe M4100 and M7100 Managed Switches

Configure Rapid STP (802.1w)

The example is shown as CLI commands and as a Web interface procedure.

CLI: Configure Rapid STP (802.1w)

(Netgear switch) (Config)# spanning-tree

(Netgear switch) (Config)# spanning-tree forceversion 802.1w (Netgear switch) (Interface 1/0/3)# spanning-tree port mode

Web Interface: Configure Rapid STP (802.1w)

1.Enable 802.1w on the switch:

a. Select Switching > STP > STP Configuration. A screen similar to the following displays.

b.Enter the following information:

•For Spanning Tree Admin Mode, select the Enable radio button.

•For Force Protocol Version, select the IEEE 802.1w radio button.

c.Click Apply.

2.Configure the CST port.

a.Select Switching > STP > CST Port Configuration.

410 Chapter 25. Spanning Tree Protocol