NETGEAR M7100, M4100 manual Web Interface Add Ports to LAGs

ProSafe M4100 and M7100 Managed Switches

Web Interface: Add Ports to LAGs

1.Add ports to lag_10.

a. Select Switching > LAG > LAG Membership. A screen similar to the following displays.

b.In the LAG ID list, select LAG 1.

c.Click Unit 1. The ports display.

d.Click the gray boxes under port 2 and 3. Two check marks display in the box.

e.Click Apply to save the settings.

2.Add ports to lag_20.

a.Select Switching > LAG > LAG Membership. A screen similar to the following displays.

b.Under LAG Membership, in the LAG ID list, select LAG 2.

c.Click Unit 1. The ports display.

58 Chapter 3. LAG s