NETGEAR manual ProSafe M4100 and M7100 Managed Switches

ProSafe M4100 and M7100 Managed Switches

c.Click Add.

5.Configure a receiver on interface 0/1, 0/5, and 0/7.

a.Select Switching > MVR > Basic > MVR Interface Configuration. A screen similar to the following displays:

b.Under MVR Interface Configuration, scroll down and select the Interface 0/1, 0/5 and 0/7 check boxes.

c.Enter the following information:

•In the Admin Mode list, select Enable.

•In the Type list, select Receiver.

d.Click Apply to save the settings.

6.Configure source interface.

a.Select Switching > MVR > Basic > MVR Interface Configuration. A screen similar to the following displays:

Chapter 14. MVR (Multicast VLAN Registration) 261